Description
The high‑speed mixing granulator uses the machine body for support. Its pot holds raw materials. Stirring rotation and cutting knives supply power. The stirring paddle mixes all materials.
It rolls and blends materials evenly within a short time. Then the cutting knife turns mixed materials into granules. Finished granules flow out from the discharge port. You change the speed of the stirring paddle and cutting knife. In this way, you get granules of different sizes.
Main Features
The table below shows the complete and accurate technical parameters of the high-speed mixing granulator. These parameters ensure stable, efficient and standardized operation, meeting general production and GMP processing requirements.
- You may freely choose a horizontal cylinder structure or conical structure for this machine.
- The inner surface has no dead corners. It works in a closed condition and meets GMP requirements.
- This machine finishes granulation quickly and saves energy.
- It produces uniform‑textured granules with good flow ability. These high‑quality granules serve raw materials for tablet pressing.
- It uses 25 percent less binder and shortens drying time compared with traditional processes.
- Each batch only takes 2 minutes for dry mixing and 1‑4 minutes for granulation. Its working efficiency is 4‑5 times higher than traditional equipment.
- Complete safety protection parts cover the whole operation process.
Even when active medicine and auxiliary materials have large proportion differences, the Granulator Machine still mixes them well without material separation.
Technical Parameters
The following table lists the complete and accurate technical parameters of the Granulator Machine. All data support the stable, efficient and standardized operation of the equipment, and meet conventional production and GMP processing requirements.
|
Parameter Item
|
Technical Data
|
|---|---|
|
Production capacity
|
3 kg per batch
|
|
Granule size
|
20‑80 mesh
|
|
Operation time
|
5‑7 min
|
|
Container volume
|
10 L
|
|
Stirring motor power
|
2.2 kw
|
|
Cutter motor power
|
1.1 kw
|
|
Stirring speed
|
30‑600 rpm
|
|
Cutter speed
|
300‑3000 rpm
|
|
Compressed air
|
0.3‑0.6 MPa
|
|
Machine weight
|
300 kg
|
|
Machine dimension
|
1250 × 550 × 1160 mm
|
Summary
This high-speed mixing granulator adopts a reasonable and flexible structural design with complete safety protection. It features fast granulation speed, high efficiency, low material consumption and stable operation. It can produce uniform and high-quality granules that meet GMP standards, making it an ideal and practical device for pharmaceutical granulation production.
Reviews
There are no reviews yet.